Everbee · Ring Tree Light

Light the tree.
Not the lawn.

Six panels sit in a ring at the base of the trunk and throw warm light upward from every side at once — up the bark, into the canopy, no glare in your eyes and no hot spots on the grass.

  • Free US shipping
  • 60-day returns
  • 5-year warranty
Ring tree light with the six panels assembled and three installed garden scenes at night
72W
Total output
10,080
Lumens warm white
IP65
Sealed all-weather
5 yr
Warranty

Why it looks different

A spotlight lights a patch. A ring lights the tree.

Two ground stakes throw two hot spots on the grass and leave the trunk black. The ring does the opposite: it puts twelve lensed LEDs in a circle at the base and grazes light up the bark, so the whole tree — trunk, branch structure, canopy — reads as one lit shape.

360° from the trunk

Six curved panels form one continuous ring. Light leaves in every direction at once, so the tree glows evenly instead of blowing out where a beam lands.

Anti-dazzle glass lens

Every LED sits behind heat-resistant glass and a wavy skirt. The light climbs the tree; it does not blind anyone walking past or sitting on the patio.

Aluminium, fully potted

Die-cast housing for heat and corrosion, the cavity filled with sealing compound, every joint a screw-together waterproof connector. Rated IP65 for permanent outdoor use.

Aluminium housing, OSRAM LEDs, glass lens and waterproof connector on the ring light

Built for a decade outside

The fixture disappears into the bed.

Guests notice the glow, never the thing making it. Each panel is 12 OSRAM 1W LEDs behind a glass lens, in a graphite aluminium body that dissipates heat instead of trapping it.

Standard inner diameter is 39 cm; drop the connecting blocks and the same six panels open to 46 cm for a thicker trunk. Nothing else to buy — the 24V transformer, stakes and screws are all in the box.

Garden tree lit from the base by a ring light at blue hour

Ring light vs. spotlight

Same tree. Same wattage. Different job.

 RingSpotlight
Coverage360°, all sides of the trunkOne narrow cone
GlareLensed and shielded, hidden in the bedVisible source, hot spots on grass
PlacementSits at the base, stakes includedAimed and re-aimed after storms
WiringOne plug-in 24V transformer per ringTransformer plus cable runs
01

Assemble the ring

Bolt the six panels around the trunk with the connecting blocks. Leave the blocks out for the wider 46 cm setting.

02

Stake it down

Six ground stakes hold the ring level at the base and keep it put through weather and mowers.

03

Plug it in

The transformer takes a standard 120V outdoor outlet. No electrician, no trench, no junction box.

Wired low-voltage fixture — not solar. Full install guide

Owner reviews

The moment it clicks on, the yard stops looking flat.

Dramatic but tasteful

"The 3000K warm white is spot on, bright enough to really showcase the trunk and canopy without looking harsh or commercial. At night, the effect is dramatic but tasteful."

"The rings disappear visually once the tree is lit, which is exactly what you want."

Gregory M. · Verified purchase

Luxury for a small price

"The ring lights up our entire massive oak tree, base to tip. So much luxury for such a small price. I highly recommend for anyone wanting to upgrade the look of their yard."

Joseph V. · Verified purchase

Makes a statement

"Easy to set up. I was worried that the light wouldn't illuminate the whole underside of our tree, but it looks great and really makes a statement in our backyard."

Crystal R. · Verified purchase

Good to know

Questions people ask before ordering

Still unsure about fit or wiring? The full FAQ covers sizing, transformers and warranty, or ask us directly.

Is this solar?

No — it is a wired low-voltage fixture. The included driver has a 120V plug and outputs 24V to the ring, so it needs a household outlet. That is deliberate: it runs at full brightness on the shortest, cloudiest night of the year.

Will it fit my tree?

The ring is 39 cm inner diameter as shipped and opens to 46 cm by removing the connecting blocks — trunks up to about 35 cm standard, 43 cm expanded. Measure where the ring will sit, roughly 20 cm above the soil.

How many sets do I need?

One ring lights one tree. Plan a ring per tree you want lit — a matched pair at the entrance takes two, a line along the fence takes three or four.

Does it need an electrician?

No. Assemble the ring, stake it down, and plug the transformer into an outdoor outlet. If the outlet is further than the lead reaches, an outdoor extension cord on the 120V side is all you need.

Can I dim it or run it from an app?

Output is fixed at 3000K warm white — nothing to pair, nothing to reset. Add a plug-in timer or smart plug at the outlet for dusk-to-dawn scheduling.

What happens in rain, sprinklers or snow load?

The housing is fully potted and rated IP65, with screw-together waterproof connectors at every joint. It is built for permanent outdoor installation.

Your yard is dark for
half of every day.

One ring turns a tree into the reason people slow down when they drive past. Start with the tree you already love.

Choose your set

Free US shipping60-day returns5-year warranty